The reference object has a long axis of 795 mm and the wand is 1000 mm long. They are equipped with 50 mm active markers that are driven by the Long Range Active Marker (LRAM) driver.

During calibration, one LRAM is used to drive the reference object and one
is used to drive the wand. After calibration, the same LRAM can be used to
drive measurement markers.

Key Features

  • Maximum triggering distance, at least 100 m
  • Can be used with frequencies from 1 to 200 Hz
  • Battery time, 100 fps, 4 markers 9 hours
  • When the control box is operated on battery power, it will enter standby mode after 30 seconds

Included in kit 130464:

  • Wand kit with 2 markers
  • L-frame with 4 markers
  • 2-meter sync cable to L-frame
  • 2 Drivers for 4 markers
  • 2 Battery packs 14,8V 2200 mAh, Li-lon
    charger and battery cable
  • 2 IR detectors with 5-meter cable
  • 2 Belt clips
Long range active marker calibration kit - feature photo